1-877-420-1330
Quest 150 Dual
Installation, Operation and Maintenance Instructions
4
www.QuestClimate.com
info@QuestClimate.com
1. Intended Application for Quest 150 Dual
The Quest 150 Dual is intended for use in light commercial structures: however, the unit can be placed in almost any
setting where dehumidification is desired. Use in highly corrosive applications and pool areas may void warranty.
The Quest 150 Dual works most effectively between 56° and 95°.
In order to efficiently control humidity levels, the area in which the dehumidifier is to be operated must be free of
water intrusion or excessive fresh (outside) air infiltration. Before installing the Quest 150 Dual, water intrusion and air
infiltration problems should be addressed.
2. Registrations
The Quest 150 Dual units conforms to unified standard UL 60335-2-40 and CSA standard C22.2.60335-2-40.
3. Specifications
4034230 Quest 150 Dual
Blower:
430 CFM @ 0.0" WG
Power:
1300 Watts @ 80°F and 60% RH
Supply voltage:
115 VAC - 1 Phase - 60 Hz.
Current Draw:
11.0 Amps
Energy Factor:
2.29 L/kWh
Operating Temp:
56°F Min - 95°F Max
Minimum Performance @ 80°F and 60% RH:
Water Removal:
Efficiency:
150 Pints/Day
4.8 Pints/kWh
Air Filter:
MERV-8 Size: 14" x 17.5" x 2"
Power Cord:
10’, 110-120 VAC, Ground
Drain Connection:
3/4” Threaded NPT or 5/8” Hose Barb
Dimensions:
Width:
Height:
Length:
Weight:
Unit Shipping
14.5"
19"
21”
27"
26"
35"
95 lbs
100 lbs
