DL4300 Appliance
Managing protected machines
188
The Summary page for the selected machine appears.
2. Click the Settings menu.
The Settings page appears, showing settings for the selected machine. Optionally, to display setting
categories from anywhere on the page, click the appropriate hyperlink on the left side of the page.
When you click on a setting you want to change, that setting becomes editable as a text field or a drop-
down menu.
For each setting, when satisfied with your changes, click
to save the change and exit edit mode, or
click
to exit edit mode without saving.
3. To modify general settings for a protected machine, click the appropriate setting, and then enter the
configuration information as described in the following table.
Table 69. General settings for a protected machine
Text Box
Description
Display Name
Enter a display name for the machine.
This is the name that displays for a protected
machine in the Rapid Recovery Core Console. You
can enter up to 64 characters. By default, this is the
host name of the machine. You can change this to
something more user-friendly if needed. Do not use
or
.
Host Name
Enter a host name for the machine.
Port
Enter a port number for the machine.
The port is used by the Rapid Recovery Core
service to communicate with this machine. The
default port is 8006.
Encryption Key
If you want an encryption key that is already defined
for this Rapid Recovery Core to be applied to the
data for every volume on this protected machine,
you can specify the encryption key here. The key
must be unlocked. If no encryption keys exist, you
can add an encryption key. For more information on
.
If the volumes on this protected machine are
encrypted, you can change to a different encryption
key. Alternatively, you can disassociate an
encryption key by selecting (none) from the
Encryption key drop-down menu.
NOTE:
After you apply an encryption key,
change an encryption key, or disassociate
an encryption key for a protected machine,
Rapid Recovery takes a new base image
upon the next scheduled or forced snapshot.
Repository
Select a repository for the recovery points.
