DL4300 Appliance
Performing a one-time VirtualBox export
252
The minimum amount is 1024 MB, and the maximum allowed by the application is 65536 MB. The
maximum amount of memory usage is limited by the amount of RAM available to the host machine.
11. To specify the disk format, next to Disk Format, click one of the following:
•
VHDX
•
VHD
NOTE:
Hyper-V Export supports VHDX disk formats if the target machine is running Windows 8
(Windows Server 2012) or higher. If the VHDX is not supported for your environment, the option
is disabled.
NOTE:
If exporting to Hyper-V generation 2, only VHDX disk format is supported.
12. To specify generation of Hyper-V to use for export, click one of the following:
•
Generation 1
•
Generation 2
NOTE:
Only generation 2 supports the secure boot option.
13. Specify the appropriate network adapter for the exported VM.
14. On the Volumes page, select the volume(s) to export; for example, C:\.
NOTE:
If the selected volumes are larger than the appropriate maximum allocations supported by the
application as indicated below, or exceed the amount of space available, you will receive an error.
•
For VHDX disk format, your selected volumes should be no larger than 64 TB.
•
For VHD disk format, your selected volumes should be no larger than 2040 GB.
15. Select Perform initial one-time export to perform the virtual export immediately instead of after the next
scheduled snapshot.
16. On the Volumes page, click Finish to complete the wizard and to start the export.
NOTE:
You can monitor the status and progress of the export by viewing the Virtual Standby or
Events pages.
Parent topic
Performing a one-time VirtualBox export
Complete the steps in this procedure to perform a one-time export to VirtualBox.
1. In the Rapid Recovery Core Console, in the button bar, click the Restore drop-down menu, click VM Export.
2. In the Virtual Machine Export Wizard, select One-time Export.
3. Click Next.
4. On the Machines page, select the protected machine that you want to export.
5. Click Next.
6. On the Recovery Points page, select the recovery point that you want to use for the export.
7. Click Next.
8. On the Destination page in the Export Wizard, in the Recover to Virtual machine drop-down menu, select
VirtualBox, and then click Next.
9. On the Virtual Machine Options page, select Use Windows machine.
10. Enter the parameters for accessing the virtual machine as described in the following table.
Table 111. Virtual machine parameters
Option
Description
Virtual Machine Name
Enter a name for the virtual machine being created.
