DL4300 Appliance
Adding a Core group to the Central Management Console
388
The Settings page appears for the selected Core.
3. In the Settings tab, modify the Core information as described in the following table.
Table 168. Core settings
Text Box
Description
Parent group
Select the parent group of the Cores for the new
Core settings you want to add.
Display name
Enter a display name for the Core.
User name
Enter the user name for the Core.
Password
Enter the password for the Core.
How should the management portal connect to [Core
name]?
Select the option that specifies the connection. You
can choose to:
•
Use [Core name]'s last known IP address
(xxx.xxx.xxx.xxx), or
•
Use hostname or IP address [host name or IP
address].
If you choose to specify the
connection through the use of a
host name or IP address, you must
enter the appropriate information in
the hostname or IP address field.
On what port is [Core name] listening?
Select either of the port options. You can choose:
•
Default port (8006), or
•
Custom port [port]
If you choose to specify the port,
enter the port number in the
Custom port field.
4. Click Test Connection.
If the test is successful, a message will display to indicate that the connection was successful.
5. Click Save.
Parent topic
Adding a Core group to the Central Management Console
Complete the steps in the following procedure to add a Core group to the Rapid Recovery Central Management
Console.
1. From the Rapid Recovery Central Management Console, click the mode selector drop-down and select
Manage.
The page refreshes, showing Add Core, Add Core Group, and Delete icons.
2. From the top of the left navigation menu, click Add Group.
