Quest Leisure
Page 4
Double low wattage
Hot plate
Product Code: K0015
Instruction Version: 3
Using the hot plate
• Read all instructions before the first use.
• Take the product and accessories out the box. Remove the stickers, protective foil or plastic from the product.
• Before using your hot plate for the first time turn the hot plate on the highest setting for 3 to 5 minutes to condition the protection coating.
This should be the only time the hot plate is turned on without a cooking utensil on it .
• The base diameter of cooking utensils smaller than the diameter of the hot plate should not be used.
• Utensils with convex, concave or uneven bottoms should not be used.
• Cooking utensils, regardless of their size, should not project beyond the hot plate or intrude into the area of close proximity of the controls.
• This hotplate features an overheat cut off, so if the temperature gets too hot is will cut out. This gives you added peace of mind, but should
never be relied upon to allow leave the hot plate unsupervised.
• Turn the controls to the recommended position marked to achieve the desired temperature.
• NOTE
: Both hot plates can be used at the same time, however care must be exercised to prevent the cooking utensil handles from protruding
over the adjacent hot plate.
• IMPORTANT
. When not in use always turn the controls to the “0”position and disconnect from the power outlet.