M120
Introduction
M120
Welcome!
Thank you for choosing this Quest Commercial M-Series Mixer Amplifier!
Quest Commercial Mixing Amplifiers are the ultimate solution for sound distribution systems in small to medium sized commercial
premises, delivering the best and highest quality audio at an affordable price. These models have a constant voltage power amplifier
allowing use at 25/70V or at low impedance of 4 or 8 Ohms. The M120 can deliver a power of 120 Watts. It offers three input
channels (
terminal block
/RCA and 3.5mm on the front panel) with independent level controls to facilitate the connection of sound
sources. A music-on-hold feature is also available for businesses wishing to enhance their customers' telephone experience. So when
you connect this mixer to a telecommunications system, customers can listen to music or pre-recorded messages while they wait.
With proper maintenance and sufficient ventilation, your product will give you satisfaction for many, many years. Record the serial
number below for future reference:
Serial Number : _______________________________
Date of Purchase : _____________________________
Unpacking and installation
Although your Quest Commercial amplifier is not complicated to install or difficult to operate, it will take a few minutes of your time
to read this manual to get the installation wired correctly and to familiarize yourself with its features and how to use them.
Connect your device to the system components as described on the following pages.
2
