1. INTRODUCTION
The Quest SafeLog 100 single gas detector is a compact, personally worn
unit, which measures either oxygen or one of eight possible toxic gases. The
measured levels of these gases are shown in a backlit, four-digit LCD
display.
When one of the unit's alarm thresholds has been exceeded, the unit pro-
duces a two-tone alarm and the LED flashes.
This 8.8 oz. unit is powered by a single 9 volt alkaline battery (life
expectancy 100 hrs.). The unit measures its gas sensor's output continuously
at one sample per second. It records over 60 hours of 1 minute historical
data including the high level for each minute, STEL, TWA, and
temperature. All recorded data can be sent to a printer or computer for
record keeping or further data analysis.
Like many of Quest's data logging instruments, the SafeLog 100 works with
the QuestSuite™ software package.
Warning: The SafeLog 100 is intended to measure gases that are poten-
tially dangerous to human health. To help ensure worker safety through
proper use of your unit, it is important that you not only read but also under-
stand the contents of this manual. Please familiarize yourself with the unit
before using it in a potentially hazardous situation.
2. GENERAL DESCRIPTION
2.1 SafeLog 100:
The SafeLog 100 is an extremely rugged, light-weight single gas datalog-
ging, personal monitor. Designed for today's demanding work environ-
ments, the unit features a large four digit display with backlighting and
pulsating warning horn and visual alarms.
Summary of Contents for SafeLog 100
Page 10: ...4 3 Sample Printout...
