11
“Parse Program” is for checking the quantity of input programs from the corresponding Tuner
input.
“Mux Program” is for selecting programs from the ASI IN to output via corresponding carrier output
or ASI output (A, B, C, D, E optional). Move the triangle mark to specify the program and press
RIGHT/LEFT keys to shift the mark between “
√
” and “
X
”. (“
√
”: to output the corresponding
program; “
X
”: not to output the corresponding program)
3)
Modulator Setting
When entering “Modulator” submenu, user can configure the modulating parameters for the 4 carrier
output separately:
As the
B-QAM-HDMI-IP-4CH
(DVB-C Modulating) is with 4 carrier outputs, “3.1”-“3.4” represent
the “Carrier A”, “Carrier B”, “Carrier B”, and “Carrier D” respectively. User can enter
“3.1”/“3.2”/“3.4”/“3.4” to set the corresponding modulating parameters. Submenus (taking “3.1” as
an example) are as below:
►
1 GXTV
√
2 SZTV
X
Parse Program
Get 3 programs
2.3.1 Parse Program
2.3.2 Mux Program
3.1 Output A
3.2 Output B
3.3 Output C
3.4 Output D
3.1 Output A
3.1.1 RF On
3.1.2 Standard
3.1.5 RF Frequency
3.1.6 RF Level
3.1.3 Constellation
3.1.4 Symbol Rate
3.1.7 ASI output
►
Output A Mux
Output B Mux
Encoder-modulator
User Manual
B-QAM-HDMI-IP-4CH
www.questtel.com
sales@questtel.com
