21
VCT (Virtual Channel Table) Setting
Click “VIT” from the menu to trigger the screen as Figure-8. Then click “Add” from this screen
to add the program descriptor in VCT.
Figure-8
Select the carrier output channel for the inserted VCT.
Click “Add” from this page, it will display the screen as Figure-9 where it requires to add
Channel TSID and configure other parameters for the programs.
Figure-9
: Click “Add” to add boxes where to configure parameters in its respective fields.
After setting all the data, users need to click “Save”
to save the setting.
Encoder-modulator
User Manual
B-QAM-HDMI-IP-4CH
www.questtel.com
sales@questtel.com
