11
Installation Instructions
1.
Notes before Installation
①
Five items in package, including: 1 Transmitter, 1 Receiver, Users’ Manual, 2
power Adaptors (without power adaptors when the Users self-provide Power
Supply). Please contact your seller if any one of them is missed.
②
Please read this manual carefully for safe use before installation.
③
Do not dismantle the device without authorization from us.
④
Please check the labels on the outside of devices (Transmitter or Receiver).
⑤
The optical transmitter is used to change video signals, data signals etc. into
optical signals and transmit them with optical fiber. This device can be connected
to PTZ camera.
⑥
The receiver is used to receive optical signals and change them into video
signals, data signals etc..This equipment should be connected to monitors, DVRs
or matrix.
⑦
The video signals out from the transmitter and into the receiver should be in
correspondence with each other, so the interfaces on the transmitter and the
receiver should be connected correspondingly.
2.
Installation Procedure
①
Connect the video source (camera) to the video input BNC connector on
Transmitter using coaxial cable.
②
Connect the video output BNC connector on Receiver to the video monitor
using coaxial cable.
③
Connect Transmitter and Receiver with the optic fiber and apply power supply
both to Transmitter and Receiver.
SDI over Fiber
User Manual
L-1SDI-NFE-TX/RX
www.questtel.com
sales@questtel.com
