2
COM0
Command contact of the first channel contact closure
3
NC1
The second channel contact closure output
No alarm: the contact is normally-closed (NC)
Alarm: the contact is open
4
COM1
Command contact of the second channel contact closure
5
--
--
2-channel contact
closure input
(AUX201)
1
K0
The first channel contact closure input
2
COM0
Command contact of the first channel contact closure
3
K1
The second channel contact closure input
4
COM1
Command contact of the second channel contact closure
5
--
--
1-channel
bi-directional RS422/
2-channel
bi-directional RS485
AUX204(T side)
1
TXA(T/
RXA1)
RS422 differential signal A output/ RS485 channel-1
differential signal A
2
TXB(T/
RXB1)
RS422 differential signal B output/ RS485 channel-1
differential signal B
3
RXA(T/
RXA2)
RS422 differential signal A input/ RS485 channel-2
differential signal A
4
RXB(T/
RXB2)
RS422 differential signal B input/ RS485 channel-2
differential signal B
5
G
Ground
1-channel
bi-directional RS422/
2-channel
bi-directional RS485
AUX204(R side)
1
RXA(T/
RXA1)
RS422 differential signal A input/ RS485 channel-1
differential signal A
2
RXB(T/
RXB1)
RS422 differential signal B input/ RS485 channel-1
differential signal B
3
TXA(T/
RXA2)
RS422 differential signal A output/ RS485 channel-2
differential signal A
4
TXB(T/
RXB2)
RS422 differential signal B output/ RS485 channel-2
differential signal B
5
G
Ground
2-channel
bi-directional RS232
(AUX205)
1
TX1
RS232 signal output 1
2
RX1
RS232 signal input 1
3
G
Ground
4
TX2
RS232 signal output 2
5
RX2
RS232 signal input 2
Note1: The AUX interface of
L-
2
SDI-FE-HD-TX
and
L-
2
SDI-FE-HD-RX
are used in pairs, e.g. if
L-
2
SDI-FE-
HD-TX
use 2-channel unidirectional audio output interface,
L-
2
SDI-FE-HD-RX
should use 2-channel
unidirectional audio input interface.
Note2: If the auxiliary channel is used as the audio channel, the embedded audio channel in the HD-SDI
signal will be unavailable.
L-2SDI-FE-HD-TX/RX
SDI Over Fiber User Manual
www.questtel.com
sales@questtel.com
