-
14
-
Special notice:
a.
In the process of clean the active optical fiber connector, you should avoid
direct shining at eye, which will cause permanence burn!!!!
b.
Use proper energy to install the active optical connector, or the ceramic tape
in the adaptor will lead to break. Once the ceramic tape is broken, the
optical output power will decrease rapidly. And turn the active optical fiber
connector slightly, the optical output power changes obviously.
c.
Please operate the optical fiber under the condition of shut off the pump
laser. Or the high output power will lead to burn the joint of the optical
output fiber, which will cause the output power decrease.
Equipment changes result in some parts does not match with this manual, without prior
notice.
www.questtel.com
sales@questtel.com
EDFA Optical Amplifier
User Manual
L-RF-EDFA-14dBm
