- 8 -
5.3 Displayed Parameter description
Name
display
discription
System Starting
QuestTel
Display logo.
L-RF-EDFA-18dBm
Display model number.
xxxxxxx
Start countdown / lock status.
Suspend Page
In:
xx.x
out:
xx.x
Unit: dBm
Display the input / output optical power
Main Page
1.Disp Parameters
Entry of parameter display menu
2.Set Parameters
Entry of parameter setting menu
3.Alarm Status
Entry of alarm information menu
1.Disp
Parameters
Input Power:
xx.x dBm
Input power, accurate to 0.1 dBm
Output Power:
xx.x dBm
Output power, accurate to 0.1 dBm
Output ATT:
x.x dBm
Output power ATT, accurate to 0.1 dBm
Pump1 Bias:
x mA
Bias current of pump1, accurate to 1mA
Pump1 Temper:
xx.x°C
Temperature of pump1, accurate to 0.1°C
Pump1 Tec:
x.xx A
Cooling current of pump1, accurate to 0.01 A
Pump2 Bias:
x mA
Bias current of pump2, accurate to 1m A
Pump2 Temper:
xx.x °C
Temperature of pump2, accurate to 0.1 °C
Pump2 Tec:
x.xx A
Cooling current of pump2, accurate to 0.01 A
+5V Read:
x.x V
+5V power supply voltage , accurate to 0.1 V
-5V Read:
-x.x V
-5V
power supply voltage , accurate to 0.1 V
System Temper:
xx.x °C
Chassis temperature, accurate to 0.1 °C
Serial NO.:
xxxxxxxx
Device serial number
IP Addr:
xxx.xxx.xxx.xxx
IP address
Mask:
xxx.xxx.xxx.xxx
Subnet mask
Gateway:
xxx.xxx.xxx.xxx
Gateway
Mac:
xxxxxxxxxxxx
Physical address
Trap Addr1:
xxx.xxx.xxx.xxx
trap1 address
Trap Addr2:
xxx.xxx.xxx.xxx
trap2 address
Firmware Ver: Vx.xx
Firmware Version number
www.questtel.com
sales@questtel.com
EDFA Optical Amplifier
User Manual
L-RF-EDFA-18dBm
