USER MANUAL
5
3.
Remove the two screws securing the handle holder on the right side of
the machine as shown. Align the mounting hole of the handle holder
with the two screw holes on the machine and tighten the two screws
removed.
4.
Install the handle holder, place the air handle, and check whether it is
suitable.
NOTE: The handle holder can be installed on the left or right side of the
machine according to actual needs.
2.5.1. Temperature Setting
Raise temperature: Click TEMP
▲
key and then the temperature will rise 1°C
and the LCD displays the current setting temperature. If pressing TEMP
▲
not
loosely at least one second, the setting temperature will rise rapidly. Loose the
TEMP
▲
key until up to the needed temperature.
Reduce temperature: Click TEMP
▼
key and then the temperature will drop
１
°C, and the LCD displays the current setting temperature.
If pressing TEMP
▼
key not loosely at least one second, the setting temperature
will drop rapidly. Loose the “TEMP
▼
” key until down to the needed
temperature.
2.5.2. Airflow Setting
Raise Airflow: Click “AIR
▲
” key and then the airflow grade will rise 1, and the LCD
displays the current setting airflow grade. If pressing “AIR
▲
”not loosely at least one
second, the setting airflow grade will rise rapidly. Loose the “AIR
▲
”key until up to the
needed airflow grade.
Reduce Airflow: Click “AIR
▼
” key and then the airflow grade will drop 1, and the LCD
displays the current setting airflow grade. If pressing “AIR
▼
”not loosely at least one
second, the setting airflow grade will drop rapidly. Loose the “AIR
▼
”key until down to the
needed airflow grade.
