USER MANUAL
1
2.
English
2.1.
Safety Instruction
In this instruction manual WARNING, CAUTION, and NOTE are defined as
follows:
WARNING:Failure to do so may result in serious accidents, fire and
personal injury. These are mandatory!
CAUTION: Failure to do so may result in injury to the user or damage to
related objects. For your own safety, you should follow these
instructions!
NOTE: Describes a process that is important to the task at hand.
When the unit is turned on, the hot air automatically heats up to the
last set temperature. There is a risk of burns on the surfaces!
The device is designed for brazing soft solder at different temperatures.
A different use is not permitted.
During operation and immediately after switching off, do not touch the
metallic parts on the tools, CAUTION! Burns!
Do not use the device near flammable substances and components.
Use a heat-resistant work surface and keep your workplace clean.
Solders, fluxes and heated materials can develop harmful properties
and should be vacuumed in a controlled manner. Do not breathe these
toxic fumes or gases and provide adequate ventilation.
Thank you for purchasing a QUICK Rework Station. Please read the operating
instructions before commissioning and keep them in a safe place that is easily
accessible to all users.
