USER MANUAL
3
CAUTION
Measures for a safe working environment:
Make sure that the device and the shelf are secure. Place the
tool on the shelf when not in use.
The use of the device by children from 8 years and persons with
disabilities is possible if they are supervised and instructed for
safe use.
Power supply cables must not come into contact with sharp
edges, heat or oils. Damaged connection cables must be
replaced by customer service to prevent potential hazards such
as electric shock, short circuits or fire.
The device must only be operated at the rated voltage and
frequency specified on the device. Use only supplied earthing
contact connecting cables.
Before use, check the device for damage and the correct fit of
the soldering tip. If damage is detected, it must be switched off.
Then please contact the customer service.
Use only Quick Original replacement parts.
When not in use, keep the device away from dust and moisture.
Pay attention to the respective safety, health and safety
regulations.
2.2.
Range of application
It is suitable to the de-soldering of the SMD components, such as SOIC,
CHIP, QFP, PLCC, BGA and so on.
It is suitable to hot shrink, drying, remove lacquer and mucosity, thaw,
preheating, disinfect and so on.
It is suitable to the situation with different grade airflow.
It is suitable to the hot air lead free de-soldering.
