USER MANUAL
7
Temperature rising:
Press “+” button directly. If so, the setting temperature will raise 1
℃
and the display window will display the set temperature. When loosen
the “+” button, the display window will delay to display the set
temperature about 2seconds. If within 2seconds, press the “+” button
again, the setting temperature will raise 1
℃
again. If press the “+”
button and not lose at least 1second, the setting temperature will rise
rapidly. Till the needed temperature reaches, then loose the “+”
button.
Temperature dropping:
Press “-” button directly. If so, the setting temperature will drop 1
℃
and the display window will display the set temperature. When loose
the “-” button, the display window will delay to display the set
temperature about 2seconds. If 2seconds later, press the “-” button
again, the setting temperature will drop 1
℃
again. If press the “-”
button and not lose at least 1second, the setting temperature will
drop rapidly. Till the needed temperature reaches, then loose the “-”
button.
Long press 2 key, enter into channel 2, as following 4-2
ESD
200 320 380
CH2
320
Temperature setting method the same as CH1
Long press 3 key, enter into channel 3, as following 4-2
Page6
