USER MANUAL
2
WARNING
When the unit is turned on, the soldering tip automatically heats
up to the last set temperature. There is a risk of burns on the
surfaces!
The device is designed for brazing soft solder at different
temperatures. A different use is not permitted.
During operation and immediately after switching off, do not
touch the metallic parts on the tools, CAUTION! Burns!
Do not use the device near flammable substances and
components.
Use a heat-resistant work surface and keep your workplace
clean.
Solders, fluxes and heated materials can develop harmful
properties and should be vacuumed in a controlled manner. Do
not breathe these toxic fumes or gases and provide adequate
ventilation.
Wear protective clothing (protective gloves, safety goggles, etc.)
and avoid contact of the soldering iron with skin and hair or
other flammable materials.
Food is prohibited in this work environment.
The use for the operation may only take place in a dry indoor
area, protect the device from liquids and moisture, also by
possibly damp hands. Otherwise, short circuits and electrical
shocks could be triggered.
Inform others in the work area that the temperature may be
very high during operation. Switch off the device as soon as the
work is finished to avoid danger.
Do not leave the device unattended while it is in operation.
After switching off, wait until the heated parts have reached
room temperature when you touch parts or want to change
parts.
