9
10. Sound Setup
1) Press the “•” and “••” for three seconds at the same time in the working mode or in
the sleeping mode. It can switch on or off the sound.
2) When the LCD displays “
”, the station has key sound and alarm sound. When not
displaying “
”, the station hasn’t key sound and alarm sound.
11. Sleeping
11.1 How to enter the sleeping mode
1) Put the handle on the handle holder, the station will enter the sleeping mode
automatically.
2) During the sleeping mode, the window will display “Off”. and then when the
temperature cooling down to 100℃, the unit comes into the sleeping mode. In the
sleeping mode, the LCD will display “Sleep”.
11.2 Wake up sleeping
When the handle is removed from the holder, the station immediately enters the
working mode.
12. Temperature Calibration
It is better to calibrate the temperature after changing the heater The method of
calibrating the temperature is as
：
1) In
the
working mode, set the calibration temperature 300℃ and 500℃ calibrate.
When the temperature is stable and the window displays “Real Temp”, test the outlet
temperature of the handle with thermometer and write down it.
Summary of Contents for 862DA+
Page 14: ...12 15 Nozzles...
