5
5.4 Main Menu
6.Installation and Connection
6.1 Hot Air Section
The handle holder must be installed when the machine is used for the first time, as
shown in the picture on the right.
1) Remove the two screws securing the handle holder on the right side of the
machine as shown.
2) Align the mounting hole of the handle holder with the two screw holes on t
he machine and tighten the two screws removed.
3) Install the handle holder, place the air handle, and check whether it is suitabl
e.
Note: the handle holder can be installed on the left or right side of the machine
according to actual needs.
Symbol
Function
Heating state
Display: button tone and alarm prompt ton
e are enabled
No display: button tone and alarm tone ar
e disabled
Real Temp
Summary of Contents for 862DA+
Page 14: ...12 15 Nozzles...
