4
5.3 LCD display descriptions
6.Installation and Connection
6.1 Connection
1) Connect the 5-pin plug into station, and make sure the pin in the plug must match
the groove in the connection socket.Place the soldering iron handle in the iron holder.
2) Insert the power plug into grounded power socket.
3)
Turn on the power switch.
Icon
Descriptions
heating state
turn on：
Shows the buzzer is open
turn off：
Shows the buzzer is close
Real Temp
/
Set Temp
/
Summary of Contents for 969D+
Page 15: ...12 15 Tip Type...
Page 16: ......
