6
2) After selecting the temperature point, press"
▲
" or "
▼
" to set the temperature of
the temperature point. To save the setting temperature of the temperature point, hold
down the “*” key until "
" is displayed in the window.
3) Temperature cannot be set in password locking state, but the three temperatures
can be selected freely. After entering the temperature setting state, press the
“
*
”
and select the one temperature you need.
8.Password Setting
Enter the password setting state
1)Turn off the power switch.
Press and hold the
“▲”
and
“▼
buttons
simultaneously, then turn on the power switch.
2)Continue holding down the
“▲”
and
“▼”
button until the display shows
.
3)When the display shows ,the station is in parameter input mode.
Enter the old password
1)Press the
“
*
”
button,, the window will display
“
---
”
, the 100
’
s digit will flash,
initial password can be inputted.
2)Input password: Click the
“▲”
or
“
”
button to input the 100
’
s digit, and then click
the
“
*
”
button when displaying the selected value of 100
’
s digit. After that it comes
into 10
’
s digit input. The inputting methods of the 10
’
s digit and 1
’
s digit are same
with the 100
’
s digit.
Summary of Contents for 969D+
Page 15: ...12 15 Tip Type...
Page 16: ......
