QUICK2025 manual operation
B
、
System Setting
:
System setting includes password setting, alarming setting, setting controlling switch state of out side parts of
the bottom infrared tubes, baud setting.
1) Press “RIGHT” key to the system setting interface in the MAIN interface.
2) Press “SET” key to select “PASSWORD” item. Press “SET” key again to setting value of the
“PASSWORD”. The data setting refers to the example one.
* Initial password is “000”and omnipotent password is “159”. Users can input omnipotent password “159” if
forgetting the setting password and then the system is back to initial password “000”.
* If user needs to modify the password, inputting the new password again with the above method. It will
display: Saving Password when successfully modify!
Note: it must input the right password if user wants to modify the setting parameters, otherwise only
can consult the system, not have the authority to modify the parameters.
3) Press “SAVE” key to save the data and press “DOWN” key to setting the alarm parameter. If setting
“SOUND” as “ON”, it will alarm when the temperature up to the TL.
4) Press “SAVE” key to save the data and press “DOWN” key to setting controlling switch state of the out side
parts of the infrared heating tubes. If setting “ADDED IR” as “ON”, it means the out side parts of the infrared
heating tubes are heating when the bottom heating. Setting method as above.
Page 14