BGA2015 OPERATION MANUAL
Page11
the value of TL.
S1
Heating time rising from T1 to T2. User can set the value in the range of 0~300s.
S2
Heating time rising from T2 to T3. User can set the value in the range of 0~300s.
S3
Prolonged heating time (Heat preservation time) after the temperature reach T3, and user can
also set the value in the range of 0~999s.
Unit
It’s able to set the unit of display temperature during work flow. In parameter modifying, use
UP and DOWN keys to set the value of it.
Sensor
It is used for choosing the system’s sensor type. Users can also choose K type sensor used for
measuring temperature, besides system’s IR sensor. The signal of chosen sensor will be
displayed and used for process controlling. In parameter modifying, use the UP and DOWN key
to set the value.
Password
It is used for setting password. It is designed for preventing the equipment unnecessary or
non-authorized change. When it is set to “000”, the password protecting is useless. The
password is used for all flows and it can be useful and useless in each flow. The system requires
inputting correct password before any change.
Using of password refer to
A
item.
For instance : Modify parameter of flow one and make T1=130
, S1=70s, T2=160
, S2=50s,
℃
℃
TB=130
. (Flow one has been selected)
℃
press MENU press MENU
press MENU rotate MENU
password: ***
select: 1
_
T1: 110
℃
S1: 060s
T1: 110
℃
S1: 060s
T1: 110
℃
S1: 060s
