BGA2015 OPERATION MANUAL
Page19
10
．
Equipment Maintenance
Remark:
For ensuring reliable function and maintenance of equipment, please use parts provided by
original factory.
Please turn off power switch of each part and pull out power plug when not in use.
Note:
After cutting off the power supply, the housing is still very hot, so please don’t use any
dangerous or combustible solvent to clean it.
Clean parts:
Clean the dust on system with clean towel.
Suggest to use dry or wet towel to clean the equipment. Solder on the glass of Bottom Radiator
can be cleaned out with hard object. Please be careful not to break down the glass.
Clean the prism of PL camera with pledget and be careful not to scrape it.
Use the towel with cleaning oil to clean PCB fixture and orbit.
Replace Suction Pad:
If you want to replace the Suction Pad of IR System, please turn off power, and replace it after
waiting for vacuum suction nozzle and Top Heater to cool down.
Take Suction Pad out of suction nozzle downwards, and install a new one in opposite direction.
Note:
PL EA-H00 is a precise equipment. Please don’t make any changes to it. Otherwise the
precision of this equipment will be affected.
Fixed Knob
