QUICK EA-A10 OPERATION MANUAL
Page 14
11
、
QUICKSOFT brief instruction
11.1 operation interface
1.
Operation interface: this interface reaction executive condition of flow , we can real-time operate by this
interface.
2. parameter of operation interface, be setting from “parameter testing interface”, in operation interface do not
need setting.
Parameter display: the parameter of this area do not be setting in “operation interface”, it can be setting in
parameter debug interface.
Flow select: click “start” auto enter flow, in before , must select technology way and flow file.
K type sensor: KT1~KT5, only connect K type temperature sensor, can display temperature .
Flow curve display window: temperature curve of KT1
-
KT5, easy to real-time watch and curve analysis.
Flow status bar: this bar display flow status by colour, colour is corresponding to working colour .
Status bar: real-time display current state, contain communicate state
(
online/offline
)
, the location of heat
head(up/middle/down
)
, aligning arm location
(
external/middle/interior
)
, head dissipation
(
open/close
)
,vacuum state
(
open/close
)
.
Only when communicate state is online, we can control equipment auto carry out flow by software.
K type sensor
Have
two
technology
mode, auto change from
solder and desolder.
Status bar
Parameter
display
Flow
curve
display
Flow
schedule