22
QNC CHC
EN
INSTALLATION AND USE MANUAL - REV 001A
1.0 - INFORMATION ABOUT THE PRODUCT
F
F
The instrument QNC CHC allows the windlass to be activated to get the anchor aweigh or lower the anchor providing the
measure of the chain lowered.
1.1 - Main characteristics
• Glass front.
• IPS 3.5” high-brightness colour graphic display.
• Capacitive function keys.
• Very small profile.
• Multi-language user interface.
• Automatic locked keys function.
• Automatic lowering function.
• Up alarm function.
• Windlass management with auto free fall.
• Anchor recovery function in case of sensor failure.
• Depth of chain lowered shown in meters, feet or fathoms.
• Indication of remaining chain on board
• CAN bus communication interface for data transfer.
• 12/24 Vdc power supply.
• Capable of operating in a wide range of ambient temperatures.
• Protection rating IP67.
1.2 - Important Notes
READ CAREFULLY BEFORE INSTALLING AND CONNECTING THE INSTRUMENT. IN CASE OF DOUBT, CONTACT
YOUR DEALER OR QUICK
®
CUSTOMER SERVICE.
In case of discordance or errors in translation between the translated version and the original text in the Italian
language, reference will be made to the Italian or English text.
This device was designed and constructed for use on recreational crafts. Other forms of use are not permitted
without written authorization from the company Quick
®
.
Quick
®
SPA reserves the right to modify the technical characteristics of the equipment and the contents of this manual
without prior notice.
The Quick
®
chain counter has been designed and constructed solely for the tasks and purposes given in this User’s manual.
Quick
®
company shall not be held responsible for any direct or indirect property damage caused by inappropriate use of the
chain counter, incorrect installation or possible errors present in this manual.
THE TAMPERING WITH THE CHAIN COUNTER BY UNAUTHORIZED PERSONNEL MAKES THE WARRANTY VOID.
1.3 - Precautions for safety and use
Before installing the instrument, it is recommended to refer to the notes below:
• Since the front panel of the instrument is made of glass, do not apply excessive force on its surface and avoid impacts
on it. If the glass is cracked or damaged, do not touch the front panel to avoid injury.
• Do not touch the instrument surface with sharp objects to avoid damaging it.
• If the capacitive keys are pressed with the fingertip, the instrument may not respond correctly.
• After the instrument use, it is advisable to lock the keys to avoid unwanted activations.
• The use of gloves may cause an incorrect operation of the capacitive keys.
• If there are drops of water on the front panel or if the capacitive keys are touched with wet hands, the instrument may
not respond correctly.
• With the instrument powered, during cleaning or if the front panel is wet, unintentional activations of the capacitive
keys may occur.
