OPERATION MANUAL
Note: The laser alignment device includes a secondary laser device, so don’t see the laser bean directly.
Note: When the system is in trouble and needs maintenance, it should be maintained by an experienced and
authorized technicist or mavin, or contact with service agent or our company.
The inside of the unit with dangerous voltage! The inexperienced servcing is dangerous for operators.
5. Install the Unit and Adjust Parts
5.1 Place the Unit
Unwrap the packing of the unit, then take it out and put it on the solid level worktable. Put QUICK2035 main
unit on the base plate.
5.2 Check the Unit
Please check whether the following parts are in good condition and they aren’t missed.
* QUICK2035 Main unit
* IR Base plate with PCB Fixture (Optional)
* Power cord
* Operation Manual
* IRsoft Disc
* RS232 cable
* External cooling fan (Optional)
* Monitor (Optional)
Note: The parts will be packed according to the packing list, if you don’t purchase the optional part and it
isn’t in the package. If any above part is missed out, please contact with our company or agents
immediately.
5.3 Connect the Unit
* Please check whether the power voltage accords with the rated voltage on the equipment nameplate.
* Please check whether the switches are turned off. (Set to “0”)
* Connect Power cord to the power socket behind equipment.
* If you use IR Soft, please connect the RS232 connecting cord to the RS232 socket behind the unit.
After finishing above steps, insert power plug into power socket, and switch on power.
Page 3