12
1. Press “+” or “-” button to move the cursor to the
Key Tone
.
2. Press “3” button to activate
Key Tone
.
3. Press “1” button to select Key Tone mode (ON/OFF), and press “3” button to save.
4. Press “2” button to back.
8.3.6 Address
1. Press “1” or “+” button to move the cursor to
Address
.
2. Press “3” button to activate
Address
.
3. Enter the password.
4. Enter required address,
5. Press “+” or “-” button to select number and press “1” button to change digit.
6. Press “3” button to save.
7. Press “2” button to back.
9 Maintenance
(1) After work or during prolonged break, switch off appliance and remove plug
(3) Clean the nozzle regularly with sponge, the oxide and carbide produced by residual
flux will damage the nozzle, like soldering deviation and slow heat conduction etc.
