2
1 Safety Instruction
Please read this manual carefully before use.
This system uses rated voltage and frequency.(Please refer to the trademark on the
back of the system.)
The handle is placed on the holder, the system will sleep automatically when the
temperature is below 100
℃.
This system uses a three-core grounding plug, which must be inserted into a three-hole
grounding socket.
Do not change the plug or use an ungrounded three-head adapter, which will cause
poor grounding. If you need to extend the wire, use a grounded three-core power cord.
When the system is turned on and the soldering tip and air nozzle are in a high
temperature state, do not touch them with your hands to avoid burns.
Notify other personnel of the factory that this system is extremely susceptible to burn
and may cause dangerous accidents. Turn off the system when resting or after
completion.
When installing or disassembling, remember to turn off the system and pull out the
power plug to avoid damage to the machine or cause accidents.
Do not use this system near flammable materials.
Fume will be generated during soldering, and the factory should maintain a good
ventilation environment.
Regular inspection and maintenance, please do not use when it’s damaged.
Do not modify this product without authorization.
When replacing parts, the power supply should be cut off, and original parts should be
used. Air nozzle and heating element should be replaced after cooling to room temperature.
Do not use or store it within the reach of children.
