XRSeries
EN
XR7 40 24
D
QUICK
XRSeries
INSTALLATION AND USER’S MANUAL - REV000A
5
1 - Information about the product
1.0 - Model code
VOLTAGE (V)
SERIES NAME
POWER
(W)
DRUM
(D)
1.1 - XR7 Technical Data
ELECTRIC MODEL
XR7 4000 X/Y
MODEL POWER
4000 W
Motor voltage
24 V
Maximum instantaneous pull
4000 kg (8818 lb)
Maximum work load
1500 kg (3307 lb)
Work load
700 kg (1543 lb)
Current consumption at work load
(1)
190 A
Maximum recovery speed
(2)
31 m/min (10 1.7 ft/min)
Minimum motor cable cross section
(3)
35 mm (AWG 2)
Circuit breaker
(4)
150 A
Deck thickness
(5)
30 ÷ 60 mm (1” 3/16 ÷ 2” 23/64)
Weight
181.6 kg 400 lb
ELECTRIC MODELS
XR7 AC 4000 X/Y
XR7 AC 5500 X/Y
MOTOR POWER
4000 W AC
5500 W AC
Motor voltage
(5)
230/400 V
230/400 V
Maximum instantaneous pull
4500 kg (9921 lb)
5000 kg (11000 lb)
Maximum work load
2000 kg (4409 lb)
2350 kg (5181 lb)
Maximum recovery speed
(2)
10 m/min (32.8 ft/min)
11.6 m/min (393.7 ft/min)
Deck thickness
(6)
30 ÷ 60 mm (1” 3/16 ÷ 2” 23/64)
Weight
173 kg (381.4 lb)
178.6 kg (393.7 lb)
• (1) After an initial period of use. • (2) Measurements carried out with gypsy for 16 mm STUD-LINK chain. • (3) Minimum recommended value for total length L= <20m. Calculate the cable cross
section according to the connection length. • (4) With specific circuit breaker for direct current (DC) and delayed (thermal-magnetic or hydraulic-magnetic) circuit breaker. • (5) Three-phase
motor • (6) Studs for greater deck thickness can be supplied upon request.
HYDRAULIC MODEL
XR7 HYDRO X/Y
Motor type
Reversible gear type
Displacement
43 cc
2.62 in
3
Lifting capacity
2500 kg @ 150 bar
5511 lb @ 2175 psi
Recovery speed at work load
(1)
50 l/min @ 12.5 m/min
11.4 USG/min @ 41 ft/min
Deck thickness
(2)
30 ÷ 60 mm (1” 3/16 ÷ 2” 5/16)
Weight
165 kg
363.8 lb
ADJUSTMENT VALUES
(recommended by Quick)
Flow rate
70 l/min
18.5 USG/min
Maximum pressure
150 bar
2175 psi
(1) Measurements carried out with gypsy for 16 mm stud-link chain.
(2) Studs for greater deck thickness can be supplied upon request.
QUICK
®
RESERVES THE RIGHT TO MODIFY THE TECHNICAL CHARACTERISTICS OF THE EQUIPMENT AND THE CONTENTS OF THIS MANUAL WITHOUT
PRIOR NOTICE. IN CASE OF DISCORDANCE OR ERRORS IN TRANSLATION BETWEEN THE TRANSLATED VERSION AND THE ORIGINAL TEXT IN THE ITALIAN
LANGUAGE, REFERENCE WILL BE MADE TO THE ITALIAN TEXT.
