Safety instructions
9
Familiarise yourself with the working area and terrain. Pay
attention to vertical clearance and limitations that arise due
to the increased reach.
Fig.10 Familiarise yourself with the working area before
starting. Maintain a safe distance from electrical cables and
other obstructions.
Warning!
Always look at the implement. Objects can fall or
roll backwards onto the driver when the loader is
raised. Only lift loads that are designed for each
specific implement.
Warning!
Always look at the implement. Objects can fall
out during transport. Only transport loads that
are designed for each specific implement.
Fig.11 Always look at the implement. Objects can fall or roll
backwards onto the driver when the loader is raised.
Warning!
Never stand between the front of the tractor and
the loader's cross tubes.
Warning!
Risk of crushing and jamming
The loader may fall downwards.
Lower the loader/implement to the ground prior
to lubrication.
Warning!
When installing the hoses, check that these
are long enough and that they do not get stuck
between the tool carrier, the loader beam or the
links. If necessary, adjust the couplings.
Fig.12 Never stand between the front of the tractor and the
loader's cross tubes.
Warning!
Pressurised oil.
Hydraulic oil at high pressure can be injected
into the body in the event of leakage and cause
serious injury, blindness or fatality. Leakage may
be invisible.
Use approved protective safety glasses and
protect the skin using strong leather gloves for
example. Use cardboard or wood for leakage
detection. If fluid has entered the skin then it
MUST be removed within a couple of hours by a
doctor who can treat this type of injury.
Fig.13 NEVER use fingers or hands for leakage detection.
