18
.
7
Operating an iDevice
(
Fig
18.
6
- 18.
8
)
The
Omni2
can control an iDevice in two ways:
These two methods will be referred to as Switch Control and
Voice over respectively, and each is explained in the following
sections.
Switch Control
The principle of Switch Control is that certain iDevice
commands, such as the Home button or tapping the screen,
can be assigned to commands received via Bluetooth from an
external device such as the
Omni2
.
The process for assigning
Omni2
commands to the iDevice
commands is covered in section Switch Control Set-Up.
An example of Switch Control is given below. Please note, the
screen navigation sequences are defined by the iDevice and
not the Omni2.
NOTE:
Switch Control operates by highlighting sections within the
application window. Various commands are then used to
navigate the sections and to select individual applications
(Fig
18.
6
).
iDevice command Next Item selects another highlighted area
(Fig
18.
7
).
iDevice command Select Item enters the highlighted area
(Fig
18.
8
).
Fig.
18.
6
Fig.
18.
7
Fig.
18.
8
• Using the iDevice’s Switch Control functionality
• Using the iDevice's Switch Control functionality in conjunction
with the iDevice's Voice Over functionality
249044 Rev. A
62
R-Net Control System w/Omni2
Summary of Contents for R-net
