KEY FUNCTIONS
1. ON/OFF
1) Turn on the scale by pressing this key.
2) Turn off the scale by pressing this key.
2. UNIT
1) Press this key to select the unit of measure you require: Kg or pounds.
2) After turning the scale on, if the display shows 0.00, the weight is expressed in kg
and g. If the display shows 0:0, the weight is expressed in pounds and ounces.
3. HOLD (BLOCK WEIGHT FUNCTION)
1) Due to the baby moving, the weight shown on the display changes all the time.
When the baby is laid on the plate, press the “HOLD” key.
2) The display shows “hold” and the scale automatically calculate the average of the
weights it has taken.
3) The display then shows the baby’s weight and at the top the symbol “ ” starts
flashing.
4. TARE
If the baby is laid on a towel or cover, use the TARE function:
1) Turn the scale on with the ON/OFF key.
2) The display shows “8888”.
3) Wait until the display shows “0.00” then place the towel or cover on the plate
4) Press the TARE key and wait until the display shows “0.00”; the scale is now ready
for use.
