Strengthening time
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
MENU
4.BOOSTDURATION
5.BOOSTDEGREE
6.WAKEUPMETHOD
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
BOOSTDURATION
[30S]
After choosing strengthen the time function, short press the encoder and enter the time
setting. The time setting range: 0-99 minutes.
The default time is 30 seconds, it can be set according as the actual needs, after setting,
short press the encoder to confirm and exit. When working normally, it takes a short time to
increase temperature welding the larger welding spot, it can be heated to the set
temperature rapidly after pressing the encoder. After 30 seconds, the host will
automatically return to original temperature. This can avoid soldering iron tip oxidation
when with high temperature to use!
Strengthening temperature
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
MENU
4.BOOSTDURATION
5.BOOSTDEGREE
6.WAKEUPMETHOD
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
BOOSTDEGREE
[50
℃
]
After choosing strengthen the function of temperature, short press the encoder, enter
strengthening temperature setting, the temperature setting range: 10-80
℃
.
The default strengthen temperature is 30
℃
, it can be set according as actual needs,
after setting, short press the encoder to confirm and exit. When working normally, it takes a
short time to increase temperature welding the larger soldering spot, it can be heated to the
set temperature rapidly after pressing the encoder. After 30 seconds, the host will
automatically return to original temperature. This can avoid soldering iron tip oxidation
when with high temperature to use!
UICKO
OLED T12 QUICKO HEATING SOLDERING STATION
1 -95
T
BOOSTDEGREE
[80
℃
]
