6
2.Manager card configuration:when finish the RFID initialization, take the manager card access to the RFID
coil, if the manager card read successfully, there will be a beep Di-di--and the blue LED indicator will
illuminate which means the manager card configure successfully.
3.Common user card configuration:take the manager card access to the RFID coil, the lock will open, there
will be a beep Di, then the lock will open and blue LED indicator will illuminate 6 seconds.Take the common
user card access to the RFID coil when the blue LED indicator illuminating, the lock will beep Di which means
the common user card configure successfully.When the blue LED indicator stop illuminating which means the
configuration is finished.
4.Cancel the common user card:use a thin rod plug into the RFID hole on lock house for a short press, then
the lock will beep Di-di-di-di-di- within 5seconds and the blue LED indicator will illuminate. Take the manager
card access to the RFID coil in 2seconds, the lock will beep Di-di-di and the blue LED indicator illuminate
3times which means all the cards are canceled.
5.Unconfigured card: when an unconfigured card access to the RFID coil, the lock will beep Di-di-di and the
blue LED indicator illuminating.
Technical
Specifications
：
Environmental Parameters
Working Temperature Range
-10℃ to +60℃
Storage Temperature Range
-20℃ to +70℃
Operating Humidity Range
45% to 80%RH
Storage Humidity Range
30% to 90%RH
System Parameters
Main Chip Type
STM32F030C8T6
Storage Space
64Kbit
Operation System
Android 4.1or IOS advanced in 8.0
Basic Parameters
Button/Switch
RFID Setting Button, Bluetooth Re-set Button and Switch for
Voice
Touch Sensor
External Power Jack, Metal Ring
RFID Module
125kHz
Bluetooth Module
Bluetooth 4.2, Transmit Distance
Indicator Light
External Blue Operation Indicator
Illuminate Light
White
Operation Hints
Voice and Lamplight Hint
Usage Time
Standby Mode
More than one year
Power
Battery
1.5V R6P AA Alkaline Battery, 4pcs
Battery Type
In Series
External Power Connector Type 4P 2.5mm Headphone Jack
Standby Current
0.3mA
