Quicksilver 555CAB — General Information
2
2. Vessel Stability
The following maximum load has been used for assessing the stability and buoyancy comprising
•
Manufacturer’s maximum recommended load per ISO 14946
558kg
•
Fuel, fresh water, other fluids to maximum capacity of fixed tanks
78kg
This assessment has been made assuming that
•
The boat in the empty craft condition has a mass of
865kg
•
The boat in the light craft condition has a mass of
1158kg
•
The maximum recommended single engine outboard mass is
164kg
•
All standard equipment is aboard.
Your boat was manufactured to specific stability and flotation standards for the capacity shown on the
certification plate. Any increase from the recommended load capacities will put your boat in jeopardy
of capsizing, swamping and/or sinking. In addition, any changes to the masses aboard may significantly
affect the stability, trim, and performance of the craft. Stability can be considerably affected by loose
fluids or weight within the vessel. Keep the bilge area as dry as possible, and in rough weather or at
planing speeds, keep all openings, hatches, lockers, doorways, and windows closed to minimize
flooding. Breaking waves are a serious stability hazard. Finally, stability can be compromised when
towing or lifting heavy weights using a davit or boom.
Your boat has been designed and assessed with foam flotation so that if necessary, it is capable of
supporting the crew when the boat is swamped.
3. Load Capacity
The capacity plate, located near the helm, indicates the maximum weight and number of persons
your boat can handle under calm sea conditions. Do not exceed the load capacities stated. A full
explanation of this information can be found in the relevant sections of this manual.
The information present on the certification plate does not relieve the operator of responsibility. Use
common sense and sound judgment when placing equipment and/or passengers in your boat.
Quicksilver 555CAB Capacity Plate
Do not exceed the maximum recommended number of
persons. Regardless of the number of persons on board, the
total weight of persons and equipment must never exceed
the maximum recommended load. Always use the seats/
seating spaces provided.
When loading the craft, never exceed the maximum
recommended load. Always load the craft carefully and
distribute loads appropriately to maintain design trim
(approximately level), and secure loose equipment when
underway. Avoid placing heavy weights high up.
