Attach (1) Double Bearing Tail Rotor
Assembly to the Tail Output Shaft
using (1) M3-3 Set Screw.
Note:
Make sure set screw is securely
in the hole on the shaft.
Replacement Part #:
Double BB Tail Rotor Assm. –
QUIP200
Double BB Tail Rotor Hub – QT365A
Tail Blade Grip Set – QT365B
Install (2) 5mm Tail Rotor Blades Using
(4) Tail Rotor Blade spacers, (2) M3-18
Cap Head Bolts, (2) M3 Lock Nuts.
Replacement Part #:
HHI Tail Blades – HHI6305
Install (2) Shim Balls using (2) M2-8
Phillips Screws to the outside hole of
the Tail Blade Grips.
Install (2) Medium Ball Links to the Tail
Pitch Slider and connect them with
shim balls on the blade Grips.
Note: The Tail Blades should rotate
counter clockwise when looking at the
right side of the Tail Case.
Replacement Part #:
2.3 Med Ball Links (10) – HHI2021
