7
Step 4
Erect the 4 x Side Poles (#1).
Insert the pole pin through the metal "D" ring (at the four corners of the roof cover) and
the brass grommet of each side pole.
Thread 2 x Tie-Down Ropes (#B) through each pole pin.
Tie the other end of the Tie-Down Ropes to the anchors.
a)
b)
c)
Raise the 4 x Side Poles (#1) to their upright position.
d)
Step 5
Assemble the center pole.
Connect the Lower Center Pole (#3) with the Upper Center Pole (#2).
Insert the tip end of the Upper Center Pole (#2) through the "B" ring (near the pre-drilled
hole at the peak of the roof cover) and the brass grommet. Please be sure not to
puncture the roof cover.
Lift the connected center pole into a vertical position.
a)
b)
c)
Secure the top of the Upper Center Pole (#2) with buckles and bolts.
d)
Adjust the Tie-Down Ropes (#B) to make sure all poles are well-secured.
e)
“B” Ring
“D” Ring
2
3
Side Pole (#1)
