Page 35 of 57
IMPORTANT: Calibration Check must be performed within 30 days, prior to testing any patient
sample.
Refer to the assay-specific Package Insert for Calibration Check frequency.
Perform Sofia Calibration Check
Use the specific Calibration Cassette included with Sofia for the Calibration Check.
Following the prompts, insert the Calibration Cassette into Sofia and gently close the drawer. Sofia
will perform the Calibration Check automatically.
The Calibration Cassette will automatically eject when calibration is complete.
Select OK to return to the Main Menu after calibration is completed.
Caution: Store the Calibration Cassette in the provided storage pouch at room
temperature (15°C to 30°C) between uses. Improper storage could damage the
Calibration Cassette, which may lead to failed Sofia Calibration Check.
Calibration Results
Sofia displays “Calibration Results” indicating that Calibration Check is completed. The results will
be either “Passed” or “Failed.”
The calibration results are stored and can be recalled with the Review Calibration Results
function of Sofia from the Review Data menu (page 29).
Run QC
External Quality Controls (QC) may be tested to demonstrate that the assay-specific reagents,
cassettes and assay procedures are performing properly.
To run the External Controls, refer to the assay-specific Package Insert for each specific test for
step-by-step instructions.
Note: If Calibration Check does not complete successfully, notify the on-site Supervisor or
contact Quidel Technical Support for assistance at 800.874.1517 (in the U.S.). See page 4 for
additional contact information.
Note: When running Positive and Negative controls with a qualitative test, the Positive Control
must be tested first before the Negative Control.
Summary of Contents for Sofia
