Installation Manual
Quidway S5000 Series Ethernet Switches
Chapter 1 Product Overview
Huawei Technologies Proprietary
1-3
12 GE interfaces
Console port
MODE
System status indicators
Port status
mode indicators
4 GBIC interfaces
Figure 1-1
S5012G front panel
II. Indicators on front panel
The indicator meaning on the front panel of S5012G is listed in the table below.
Table 1-1
System status indicators of S5012G switch
Description
Indicator
Status
Status Description
ON or
blinking
Blinking with frequency 0.5Hz means the
switch is running normally.
Blinking with frequency 4Hz means the
switch is downloading host program.
Steady ON means the switch is powered on
but not loading application program yet or the
switch is in fault state.
RUN
OFF
The switch is powered off or in fault state.
ON
The master power module of the switch
works normally.
MPS(Mai
n Power
Supply)
OFF
The master power module of the switch is
disconnected or in fault state.
ON
The redundant power module of the switch is
in service and in normal status.
(If MPS is on, the switch is powered by
master power module, no matter what status
RPS is in.
When MPS is off but RPS is on, the switch is
powered by redundant power module.)
Blinkin
g
Blinking with frequency 4Hz means the
redundant power module is in fault state.
System
status
indicators
RPS(Red
undant
Power
System)
OFF
The redundant power module of the switch is
idle or disconnected.
