Installation Manual
Quidway S5000 Series Ethernet Switches
Chapter 1 Product Overview
Huawei Technologies Proprietary
1-7
1.4 S5024G-24/20TP and S5024G-24/20TP-DC
1.4.1 Front View
Note:
S5024G-24/20TP and S5024G-24/20TP-DC have the same front panels. The following
description is based on S5024G-24/20TP, and S5024G stands for both
S5012T-12/10GBC and S5012T-12/10GBC-DC.
I. Front panel
You can find the system status indicators (RUN, MPS and RPS), indicator mode control
button (MODE), port status mode indicators (L/A, D/C and SPD), 20 fixed GE electric
ports (RJ-45 connector, the ports are numbered from below to above and from left to
right, that is port 2 is above port 1, and port 4 is above port 3, and so on. Their
corresponding LEDs are below from left to right), four GBIC ports (with indicators below)
and one Console port located in order on the front panel of S5012G Ethernet Switch.
See the figure below.
4 GBIC interfaces
Console port
System status indicators
MODE
Port status
mode indicators
20 GE interfaces
Figure 1-5
S5024G front panel
II. Indicators on front panel
See
1.2.1 II. Indicators on front panel
for the indicator meaning on the front panel of
S5024G.
1.4.2 Rear View
The S5024G and S5012G have the same rear panels. See
1.2.2 Rear View
for details.
1.5 Attributes of Console Port
S5000 Series provide a Console port which is in compliance with EIA/TIA-232
asynchronous serial connection for local or remote configuration of the switches.