background image

QUIETCOOLSYSTEMS.COM

3

1. SYSTEM OVERVIEW

1.1 INTRODUCTION

CONGRATULATIONS

on the purchase of your new QuietCool Smart Attic Fan!

QuietCool Attic Fans are the best in the business. New for 2020, 

our Smart Line of attic fans have gotten even smarter! Now through 

the use of a smartphone app, you can control all the settings of your 

Smart Attic Fan right from your couch!

With the QuietCool Smart Control App, you can see your current 

attic temperature and humidity, modify the temperatures for the 

multiple speeds of the fan, setup presets for the different seasons of 

the year, and even operate your fan on a timer!

QuietCool Attic Fans work almost everywhere, anytime. During the 

summer, an attic can be 40-50 degrees hotter than the outside tem-

perature, which in turn heats up the house much faster. With an attic 

fan, you can cool the attic to the same temperature as it is outside, 

greatly reducing the house from heating as quickly.

1.2 FEATURES 

+

 High Efficiency Multi-Speed Motor

+

 App Based Smart Control

+

 Designed and Built in California

+

 15 Year Warranty

WELCOME

INST

ALLA

TION

WIRING

OPERA

TION

W

ARRANTY

Summary of Contents for AFR SMT ES-2.0

























Reviews: