How to Use
Using the food processor
Always make sure that
the stainless steel
mixing bowl is not filled
beyond the MAX mark.
Note:
The markings on the stainless
steel mixing bowl (E) correspond to
the following filling quantities.
1st mark → 0.5 litre
2nd mark → 1.0 litre
3rd mark →1.5 litres (maximum filling
quantity for boiling water or cooking
other liquid ingredients)
4th mark "MAX" →2.2 litres
(maximum filling quantity)
If you wish to prepare
both solid and liquid
ingredients in the
stainless steel mixing
bowl, place the liquid in
the mixing bowl first.
Then add the solid
ingredients. Always cut
solid ingredients into bite-
size pieces (approx. 2 cm
x 2 cm x 2 cm) before
placing them in the
mixing bowl to prevent
the blades from jamming.
The amount of filling and
the speed depend largely
on the consistency of the
food used
(thick or solid paste, or
diluted broth). Therefore, the
filling quantity and speed
must always be adapted to
the ingredients used. In this
way, unnecessary splashing
and possible overloading of
the drive motor is avoided.
Before removing the cover
or any accessory, switch
off the appliance, unplug it
and wait until all the
elements have come to a
complete stop.
Always connect the
appliance to the earthed
mains socket first when all
components are correctly
installed and assembled.
When the set preparation
time has elapsed, the
appliance stops working and
the display flashes. After a
few seconds, the settings are
reset. If the appliance does
not stop, it will automatically
switch off after a few minutes
or go into standby mode. In
order to be able to switch it
on again or to prepare the
following settings during the
flashing, the display must be
reset.
25
