©2006 QNC, Inc. 0106 Operator’s Manual
24
cooking chamber with a commercial oven cleaner possibly as often as
each day or as infrequently as once a week. The frequency depends on
the quantity of foods you prepare and the oil content of these various
foods. Always use these products in accordance with manufacturer's
directions.
QNC, or your Quik n' Crispy distributor, has available a cleaner called
Dip-R-Spray, an excellent cleaner for use in your Quik n' Crispy. It is
safe to use and is the quickest, easiest to use cooking chamber cleaner
that we have evaluated to date. It is applied to the cooking chamber after
it has been pre-warmed to 200° F. Upon contact with the spray, the
carbonized grease is dissolved. The cooking chamber is then sprayed
lightly with a vinegar and water solution (at least one-third vinegar) to
neutralize the Dip-R-Spray and wiped with a clean cloth. The interior of
the unit will be left clean and streak free.
The Quik n' Crispy is now ready for the next use.
Please note that we recommend the replacement of the Quik n’ Crispy Dip Tank
Cleaner solution every 30 days. During this 30 day time period, the DTC-2
solution will start to neutralize and loose its effectiveness. The chemical reaction
of the active chemicals in the DTC-2 in conjunction with the grease or carbon that
is adhered to the interior components of your Quik n’ Crispy forms a crude form of
soap that floats to top of your soaking container. This can be removed periodically
with a disposable coffee filter or some other type of skimmer. At the end of the 30
days the solution can be disposed of in your sewage system. The pH in the end
solution is typically milder than that of a drain cleaner. If you are utilizing a septic
system, or you wish to further neutralize the solution prior to disposing, you can
neutralize the solution by pouring vinegar slowly into the solution while stirring.
The pH target is 6.5 to 8.5. You can obtain a pH test kit from a swimming pool
chemicals supply store.
Summary of Contents for GF - II
