Specifications
• Capacity: 3000mAh
• Micro USB Input: 5V/1A
• USB Output: 5V/1A
• Built-in High Capacity Battery
• Dimensions: 2.75x1.26x0.87 Inches
• Certifications: FCC
• Operating Temperature: 10˚C-40˚C
• Storage Temperature: -20˚C-45˚C
How to Use
Charging your PowerFUEL™
1. Use the USB to Micro USB cable (included) to charge
your PowerFUEL™. Plug the micro USB connector
into the portable charger and the USB connector into
your computer or wall adapter. When charging LED
indicator will flash red to indicate the portable charger
is charging.
2. When charging is complete the LED indicator will
turn green.
Note: After 20 seconds the portable charger will turn off
automatically once it is disconnected from power source.
Charging you Mobile Device
1. Using your device’s original USB charging cable to
charge your device. Connect the USB connector to the
portable charger and the other end of your cable into
2
your device. When charging your device the LED
indicator on your portable charger will be on
(displaying the amount of power that the portable
charger has remaining).
• Red: 0%–25% power remaining
• Yellow: 25%-75% power remaining
• Green: 75%-100% power remaining
2. Once the device is fully charging remember to
disconnect the cable.
Important Notes
1. Please fully charge your portable charger before you use
it for the first time.
2. Please do not charge the portable charger while you are
charging another device.
3. When charging the portable charger, use only the
original cable; otherwise, the portable charger may
be damaged.
4. Do not drop, knock, disassemble or attempt to repair
the charger by yourself.
5. Do not immerse the charger in water or get it wet.
6. Do not expose the charger to any heat source like fire
or heaters.
7. Keep out of reach of children.
8. Do not use in the presence of flammable gas.
