background image

SET UP

To maximize efficiency, position the QUILO® AVIANCE™ according to the following
guidelines:

SAFETY RULES

WARNING — READ AND SAVE THE QE2RIVKS USER MANUAL

The QUILO® AVIANCE™ User Manual is intended to provide important information
needed to set up, operate, maintain and troubleshoot your QUILO® AVIANCE™. Failure
to follow these instructions may damage and/or impair its operation, create hazards,
and void the warranty. In case there is any inconsistency or conflict between the English
version and any other language version of the content of this material, the English
version shall prevail.
When using electrical appliances, basic safety precautions should always be followed.

Note: Always ensure the water tank is filled with water above the ‘Min’ level mark when
operating the unit in the evaporative cooling & humidification modes.

Cooling

For the maximum cooling effect, place the unit in front of an open door or window. Ensure
that there is adequate cross-ventilation in the room by leaving a door or window open
opposite the cooler.

QUILO® AVIANCE™ must be kept level and there must be sufficient water in the tank. Doors 
and windows should be opened to allow free airflow. The QUILO® AVIANCE™ works best 
when placed near an open window, so that outside air is drawn into the unit, circulates in 
the room, then exits via the door. The maximum cooling effect is felt when a person is near 
the flow of air coming out of the unit.

Humidification

The QUILO® AVIANCE™ produces moist air through the evaporative cooling process and 
can be used to humidify dry air. When the device is to be used for humidification, it must 
be ensured that the windows and doors are closed.

Air Purification

To ensure that your room air is purified properly on both sides of the cycle, please make 
sure that the gap between the air inlet and the wall is at least 50 cm and the gap to the air 
outlet is at least 30 cm.
Please keep the device at least 1 meter away from television, radio, etc.
Please do not insert the power plug in the same socket as the television, radio, and other 
electrical devices to avoid any electrical interference on the other devices.
Keeping the device placed at the same spot for a long time may result in the walls near 
the device getting dirty.
To ensure that the device has adequate ventilation and works with maximum efficiency, 
please keep it away from anything that might cause interference with the air inlet or 
outlet.

3

Summary of Contents for AVIANCE QE2RVKS


























Reviews: