(*) If available
The indicated oil exchange intervals are valid for standard operating conditions (see section
) and nominal operating pressure (see section
). Exposure of the
compressor to external pollutants, operation at high humidity combined with low duty cycles or operation at
higher temperatures may require a shorter oil exchange interval. Contact your supplier if in doubt.
Important
•
Always consult your supplier if a service timer setting has to be changed.
•
For the change interval of oil and oil filter in extreme conditions, consult your Customer
Centre.
•
Any leakage should be attended to immediately. Damaged hoses or flexible joints must
be replaced.
6.2
Storage after installation
Procedure
Run the compressor regularly, e.g. twice a week, until warm. Load and unload the compressor a few times.
If the compressor is going to be stored without running from time to time, protective
measures must be taken. Consult your supplier.
6.3
Service kits
Service kits
For overhauling and for preventive maintenance, a wide range of service kits is available. Service kits comprise
all parts required for servicing the component and offer the benefits of genuine parts while keeping the
maintenance budget low.
Consult the Spare Parts List for part numbers.
6.4
Disposal of used material
Used filters or any other used material (e.g. desiccant, lubricants, cleaning rags, machine parts, etc.) must be
disposed of in an environmentally friendly and safe manner, and in line with the local recommendations and
environmental legislation.
Instruction book
2920 7101 21
73
Summary of Contents for QGS 40
Page 1: ...QGS 40 QGS 50 QGS 60 QGS 75 QGS 100 Instruction book Oil flooded rotary screw compressors...
Page 2: ......
Page 100: ......
Page 101: ......
