Section III - Controller
24
Quincy Compressor
•
Section D
shows the Action buttons. Depending on the situation, these buttons are
used:
• To call up or program settings
• To reset a motor overload, service message or emergency stop
• To have access to all data collected by the regulator
The function of the buttons depends on the displayed menu. The most common
functions are:
Designation
Function
Menu
To go to the menu
Modify
To modify programmable settings
Reset
To reset a timer or message
To activate an action button, highlight the button by using the Scroll keys and press the
Enter key.
To go back to the previous menu, press the Escape key.
Chart views
Instead of viewing values, it is also possible to view a graph of one of the input signals
(see section Inputs menu) in function of the time.
When Chart (High Resolution) is selected, the chart shows the variation of the selected
input (in this case the pressure) per minute. Also the instantaneous value is displayed.
The screen shows the last 4 minutes.
The switch button (icon) for selecting other screens is changed into a small Chart and is
highlighted (active).
