Section III - Controller
44
Quincy Compressor
(2)
Pressure band 1 High
(3)
Pressure band 1 Low
(4)
Pressure band 2 High
(5)
Pressure band 2 Low
(6)
Modify
• The screen shows the actual stopping and starting pressure settings for both
pressure bands.
To modify the settings, move the cursor to the action button Modify and press the
Enter key. Following screen appears:
• The first line of the screen is highlighted. Use the Scroll keys to highlight the setting
to be modified and press the Enter key. Following screen appears:
Text on image
(1)
Regulation
(2)
Stopping pressure
• The upper and lower limit of the setting is shown in grey, the actual setting is shown
in black. Use the
↑
or
↓
key of the Scroll keys to modify the settings as required and
press the Enter key to accept.
If necessary, change the other settings as required in the same way as described above.
